Skip to content
CHANGHONGINDUSTRIAL FILTRATION Request a Quote

How to Choose a Micron Rating for Liquid Filter Bags

Choose a filter bag micron rating by defining what must be removed from the liquid, checking the proposed bag’s performance evidence, and verifying that configuration under your operating conditions. The smallest number in a catalog is not automatically the right purchase. A useful specification connects the rating to an acceptance test and a workable production run.

This guide is for buyers who have already chosen liquid bag filtration. If you are still deciding between element formats, start with our bag filter versus cartridge filter buying guide. Here, the decision is narrower: which bag rating should you evaluate, and what evidence would justify ordering it?

1. Write the acceptance requirement before choosing a number

Start with the problem downstream. A request to protect a particular piece of equipment is different from a request to meet a finished-liquid quality specification. Ask the person responsible for that equipment or specification to define the acceptable result. Avoid replacing that requirement with a visual description such as “clear enough.”

Use a short selection record rather than a list of preferred micron numbers:

If the target particle size is unknown, say so in the inquiry. Sending a current bag label, a description of the defect and available sample results gives the supplier a better starting point than presenting an unverified micron value as a fixed requirement.

2. Treat the micron value as one part of a performance specification

A micron, written μm, is one thousandth of a millimeter. The number identifies a size scale; it does not, by itself, establish how a finished bag will perform in your liquid. Before comparing two offers, request the rating basis, removal-efficiency information and relevant test conditions. Do not assign a universal percentage to the words “nominal” or “absolute.”

Keep the supplier’s evidence attached to the exact media and bag configuration being quoted. A general brochure statement should not silently become a guarantee for every available rating. When evidence is missing, mark the candidate “requires confirmation,” rather than treating missing information as a pass.

Also keep physical fit separate from filtration performance. Confirming the ring, dimensions and support arrangement does not validate the micron choice; confirming the micron choice does not establish that the bag fits the housing.

3. Build a small shortlist of available configurations

The RD industrial liquid filter bag range lists discrete ratings of 1, 5, 10, 25, 50, 100 and 200 μm. These are published options, not a promise that every material is offered or suitable at every rating. The listed media families are polypropylene, polyester, nylon, PTFE and stainless steel; confirm the proposed combination for the actual liquid and duty.

Shortlist only configurations the supplier can document. Keep a record of the media, construction, rating basis, bag dimensions and opening or ring details alongside each candidate. If more than one characteristic changes between trials, record all of them: the result then compares complete configurations, not micron numbers alone.

For example, a buyer might investigate 25 μm and 50 μm candidates after reviewing the process requirement. That is a proposed comparison, not a recommendation for an unidentified liquid. Neither candidate becomes acceptable until the agreed quality and operating checks support it.

4. Verify quality and operating behavior in the same trial

Plan the trial with the process owner and equipment supplier. Document the liquid condition, temperature, flow and sampling points so that the results can be interpreted later. A successful sample collected under one set of conditions should not be treated as proof for an untested operating range.

During the run, record inlet and outlet pressures and the resulting differential pressure alongside flow, elapsed time or processed volume, and the agreed downstream quality measurement. Particle accumulation can increase pressure drop. Use the approved equipment and bag limits to set stopping criteria; do not adopt a generic change-out pressure from an unrelated installation.

The following decision sheet is an illustrative evaluation method, not a report of customer tests:

Trial observation Decision before ordering
Quality passes and the required run is completed within approved limits. Document the tested configuration and conditions as a candidate for approval.
Quality passes, but the run stops before the required volume is processed. Investigate loading, flow and configuration with the supplier before committing to repeat orders.
Operating behavior is acceptable, but downstream quality fails. Do not approve the candidate merely because it maintains flow.
The result changes between runs with different feed conditions. Identify the changed conditions and agree what further evaluation is needed.

A finer candidate deserves approval only if its measured result meets the requirement. A coarser candidate should not be accepted solely because the run is easier to operate. The purchasing decision needs both quality and operating evidence.

5. Turn the trial decision into a repeatable bag specification

Once a configuration is approved, preserve more than its micron value in the purchasing record. Include the supplier’s configuration reference, media, rating and rating basis, dimensions, opening or ring details, and the conditions covered by the evaluation. Attach the relevant data sheet and acceptance record so a later replacement order does not restart the selection from memory.

The filter selection checklist helps organize the process and installation details. For bag inquiries, include the existing housing information and photographs of the bag opening where available. Ask for confirmation of chemical compatibility and operating limits for the complete proposed configuration.

Prepare a rating inquiry even if the specification is incomplete

You do not need to invent missing information to start a discussion. Separate what is known from what needs evaluation. A useful inquiry might say: “We use a liquid filter bag in an existing housing. The current rating is known, but the required downstream result has changed. Please review the attached dimensions and process information and identify the information needed to assess a replacement.”

Explore the technical resources for documentation requests, or request selection support for an RD filter bag. Include the desired rating if known, the liquid, operating conditions and quantity. If the rating is still undecided, describe the required result instead.